Nameplate and Finale inventory match.
These dates describe the photo evidence. They are not a current stock or test confirmation.
The MDD071A-N-030-N2S-095PB0 is a recorded designation in the Indramat MDD family. Match every character and the installed configuration before ordering or substituting.
Units that share a base model can differ in power, feedback, command interface, firmware, brake, shaft, cooling or installed modules.
| Exact designation | MDD071A-N-030-N2S-095PB0 |
|---|---|
| Family | MDD |
| Model group | MDD071A |
| Product type | Digital AC servo motor |
| Quantity in the historical snapshot | 3 · not a current stock count |
| Quantity snapshot date | 2026-08-22 |
| Current price & condition | Confirmed with your quote |
The quantity snapshot, photo reference and photo review can have different dates. None confirms today’s physical stock, test status, firmware or included accessories.
MDD071 digital AC servo motors have A, B and C length packages. The planning tables document all three lengths with 030, 040 and 060 nominal-speed codes; the rest of the nameplate identifies the mechanical and feedback configuration.
| Length packages | A, B and C |
|---|---|
| Nominal-speed codes | 030: 3,000 rpm; 040: 4,000 rpm; 060: 6,000 rpm |
| Centering diameter | 095: 95 mm |
| Feedback | S: digital servo feedback; T: integrated multiturn absolute encoder |
| Output shaft | G: plain; P: keyed |
| Power connection | A or B: corresponding motor side; R or L: right or left when facing the shaft with the connection housing above |
| Blocking brake | 0: none; 1: 3.0 Nm; 2: 6.5 Nm |
| Housing | N: standard housing for natural convection or surface cooling |
Compatibility checkpoint: Nominal speed is not guaranteed usable speed. Verify the complete suffix, motor/drive combination, load and cooling against the applicable performance tables. A family-level option list is not an interchangeability or stock claim.
View manual reference: MDD Digital AC Servo Motors - Project Planning Manual, printed pages 64-65 and 72 →| Identity | Complete type code, material number and revision from the physical label |
|---|---|
| Electrical design | Winding or nominal-speed field |
| Feedback | Encoder, resolver, tacho or digital-servo-feedback field |
| Mechanical interface | Shaft, flange and centering code |
| Holding | Brake selection and torque |
| Installation | Cooling and connector direction |
A straight-on nameplate image is the most useful first view. Add the full unit, connectors or option modules, and the shaft, flange or rear interface when requesting a stock check or repair review.
Send the machine builder, model, axis, fault history and photos of the label and installed interfaces. Litco reviews the unit before confirming repairability, testing, timing and terms.
These records may share a model or family, but only a complete configuration review can establish compatibility.
Availability · repair · offers
The suffix can change electrical and mechanical compatibility. Include every character and a clear nameplate photo.
