Find your manual or checklist.
Search by family, firmware, document number or a listed fault code.
Punctuation and spaces are optional. Fault-code search finds exact F/E/A/C/P/D codes in searchable PDF text, not a diagnosis. Scanned pages, numeric-only and hexadecimal codes are not fully indexed. Match the hardware and firmware before using any reference.
DIAX02 DDS / DKS / DDC status indications
Edition: 12/96
Status-indication chapter excerpt with display meanings, possible causes and remedial actions. Starts at printed page 7; not the complete applications manual.
RAC / TDA / KDA fault-clearance guidelines
Edition: WAR1 · publication 270218
Manufacturer fault-clearance guideline for AC main spindle drives. Match the installed controller and edition before using the procedures.
HVE / HVR second-generation diagnostic display overview
Edition: Second generation · AW07
Scanned diagnostic-display table from section 11.5, printed page 11-4. Includes HVE/HVR-specific footnotes; this single page does not include the full troubleshooting chapter.
CLM-01.3-R/Z diagnostics and troubleshooting
Edition: Rev. B · 12/93
Scanned chapter 8, pages 8-1 through 8-35, covering CLM fault causes, corrective actions and status messages, plus SOT and IDS diagnostic-code indexes. No searchable text layer.
DIAX03 ELS-05VRS diagnostic index
Edition: ELS-05VRS
Electric Gear diagnostic contents for this DIAX03 firmware edition.
Contents only: code titles and original manual page references. Detailed explanations and clearing procedures are not included.
DIAX03 SSE-02VRS diagnostic index
Edition: SSE-02VRS
Servo diagnostic contents for this DIAX03 firmware edition.
Contents only: code titles and original manual page references. Detailed explanations and clearing procedures are not included.
DIAX04 ASE-02VRS diagnostic index
Edition: ASE-02VRS
Diagnostic contents for the ASE-02VRS DIAX04 platform. Hardware-family links are navigation aids, not firmware compatibility confirmation.
Contents only: code titles and original manual page references. Detailed explanations and clearing procedures are not included.
DIAX04 ELS-05VRS diagnostic index
Edition: ELS-05VRS
Electric Gear diagnostic contents for the ELS-05VRS DIAX04 platform.
Contents only: code titles and original manual page references. Detailed explanations and clearing procedures are not included.
DIAX04 SSE-02VRS diagnostic index
Edition: SSE-02VRS
Servo diagnostic contents for the SSE-02VRS DIAX04 platform.
Contents only: code titles and original manual page references. Detailed explanations and clearing procedures are not included.
ECODRIVE03 CR*-02VRS diagnostic index
Edition: CR*-02VRS
Contents excerpt, printed pages VI–X, from the CR*-02VRS documentation.
Contents only: code titles and original manual page references. Detailed explanations and clearing procedures are not included.
ECODRIVE03 FGP-03VRS diagnostic index
Edition: FGP-03VRS
Diagnostic contents for the FGP-03VRS ECODRIVE03 firmware edition.
Contents only: code titles and original manual page references. Detailed explanations and clearing procedures are not included.
ECODRIVE03 FL*-03VRS diagnostic index
Edition: FL*-03VRS
Contents excerpt, printed pages IX–XIV, from the FL*-03VRS documentation.
Contents only: code titles and original manual page references. Detailed explanations and clearing procedures are not included.
ECODRIVE03 SGP-03VRS diagnostic index
Edition: SGP-03VRS
Diagnostic contents for the SGP-03VRS ECODRIVE03 firmware edition.
Contents only: code titles and original manual page references. Detailed explanations and clearing procedures are not included.
ECODRIVE03 SMT-02VRS diagnostic index
Edition: SMT-02VRS
Diagnostic contents for the SMT-02VRS ECODRIVE03 firmware edition.
Contents only: code titles and original manual page references. Detailed explanations and clearing procedures are not included.
DKC01.1 / DKC11.1 ASE-02VRS diagnostic index
Edition: ASE-02VRS · 07/96
ECODRIVE01 diagnostic contents for DKC01.1 and DKC11.1 with ASE-02VRS firmware.
Contents only: code titles and original manual page references. Detailed explanations and clearing procedures are not included.
DKC01.1 / DKC11.1 ASE-04VRS diagnostic index
Edition: ASE-04VRS · 07/97
ECODRIVE01 diagnostic contents for DKC01.1 and DKC11.1 with ASE-04VRS firmware.
Contents only: code titles and original manual page references. Detailed explanations and clearing procedures are not included.
DKC02.1 SSE-03VRS diagnostic index
Edition: SSE-03VRS · 12/96
ECODRIVE01 diagnostic contents for DKC02.1 with SSE-03VRS firmware.
Contents only: code titles and original manual page references. Detailed explanations and clearing procedures are not included.
VisualMotion 6.0 / CLC diagnostic index
Edition: 06VRS · 03/99
Contents excerpt listing VisualMotion status, warning, shutdown and programming messages.
Contents only: code titles and original manual page references. Detailed explanations and clearing procedures are not included.
IndraMotion MLC V02 diagnostic index
Edition: V02
Controller and motion diagnostic contents for IndraMotion MLC V02. This is the MLC platform, not the separate CLM control.
Contents only: code titles and original manual page references. Detailed explanations and clearing procedures are not included.
IndraMotion MLC 04VRS diagnostic index
Edition: 04VRS
Troubleshooting-guide contents for MLC 04VRS. The document identifier is not visible in the supplied pages.
Contents only: code titles and original manual page references. Detailed explanations and clearing procedures are not included.
IndraLogic XLC / IndraMotion MLC 13VRS diagnostic index
Edition: 13VRS · RE06
Contents for controller, PLC, motion and communication diagnostic messages in XLC/MLC 13VRS.
Contents only: code titles and original manual page references. Detailed explanations and clearing procedures are not included.
IndraDrive MPx-02 to MPx-08 / HMV diagnostic index
Edition: MPx-02–MPx-08 · WA08
Diagnostic contents for the stated IndraDrive firmware range and HMV.
Contents only: code titles and original manual page references. Detailed explanations and clearing procedures are not included.
IndraDrive MPx-16 diagnostic index
Edition: MPx-16 · RE02
Contents for MPx-16 status, error, warning, command and loader diagnostic messages.
Contents only: code titles and original manual page references. Detailed explanations and clearing procedures are not included.
IndraDrive MPx-16 to MPx-19 / PSB diagnostic index
Edition: MPx-16–MPx-19 · RE07
Diagnostic contents for this firmware range and PSB. Supplied copy retains the CMA/Flodyne/Hydradyne courtesy attribution.
Contents only: code titles and original manual page references. Detailed explanations and clearing procedures are not included.
Indramat nameplate and photo checklist
Four-photo workflow, exact transcription rules and machine-context checklist for any product family.
MAC vs MDD motor identification
Compare the evidence that separates two familiar motor generations before requesting a match.
DKC interface identification checklist
Record the design generation, interface, firmware, current and connected-system evidence for DKC controllers.
DDS configured replacement checklist
Preserve the basic unit, command modules, plug-ins, software module, firmware and parameter context.
Indramat motor repair intake checklist
Identity, observed-condition, connected-system and shipping evidence for a motor repair or exchange review.
Drive and power-system repair intake checklist
Cabinet, module, firmware, fault and connected-system evidence for drives and power hardware.
ECODRIVE DKC01.1 / DKC11.1 — Maintenance Manual
Manufacturer maintenance manual. This is a different document from project-planning reference 270950; check the edition and installed hardware.
DDS / DKS / DDC / MDD — Maintenance Manual
Manufacturer maintenance reference for the named drive and motor families. This is not the DDS basic-unit planning reference R911274263.
TVD01.3 — Instruction Manual
Manufacturer instructions for TVD01.3. Distinct from applications-manual reference 271434; confirm the full supply designation and edition.
KDA / TDA / RAC — Maintenance Manual
Manufacturer maintenance reference for the named main-spindle drive families; not a substitute for the matching project-planning edition.
MDD Digital AC Servo Motors - Project Planning Manual
Factory planning data for MDD type codes, performance, feedback, brakes, cooling, dimensions and electrical integration.
MAC AC Servo Motors - Project Planning Manual
Factory documentation for MAC frame, winding, tacho feedback, brake, shaft, centering and connector information.
Rexroth Synchronous Motors MKD - Project Planning Manual
Factory documentation for MKD windings, encoder, shaft, brake, dimensions, connections and operating limits.
MHD Synchronous Motors - Project Planning Manual
Factory documentation for MHD technical data, feedback, cooling, brake, type-code fields and installation planning.
Rexroth IndraDyn S MSK Synchronous Motors
Factory documentation for MSK windings, encoders, shafts, brakes, connectors and cooling choices.
Rexroth 2AD Asynchronous Motors - Project Planning Manual
Factory documentation for 2AD cooling, feedback, mechanical interfaces and main-spindle system planning.
AC Main-Spindle Drives with Regulated 2AD Motors - Selection Guide
Reference for 2AD motor and main-spindle controller system selection.
A direct manufacturer download has not been verified. Ask Litco to help locate the applicable edition; include reference 241629.
ECODRIVE DKC01.1 / DKC11.1 Drive Controllers
Reference for DKC01.1 and DKC11.1 power data, motor selection, interfaces and cabinet planning.
A direct manufacturer download has not been verified. Ask Litco to help locate the applicable edition; include reference 270950.
ECODRIVE DKC02.1 Drive Controller
Reference for DKC02.1 current class, command interface, motor pairing and installation.
A direct manufacturer download has not been verified. Ask Litco to help locate the applicable edition; include reference 267473.
ECODRIVE DKC03.1 Drive Controller
Reference for DKC03.1 selection, options, feedback and installation.
A direct manufacturer download has not been verified. Ask Litco to help locate the applicable edition; include reference 271061.
Rexroth Indramat ECODRIVE03 DKC Controllers
Reference for DKC .3-generation interface, current, feedback, firmware and installation planning.
A direct manufacturer download has not been verified. Ask Litco to help locate the applicable edition; include reference DOK-ECODR3-DKC**.3****-PR05-EN-P.
DIAX03 DDS02.2 / DDS03.2 Drive Controller Basic Unit
Reference for DDS base units, cooling, current, feedback modules, connections and configured-drive composition.
A direct manufacturer download has not been verified. Ask Litco to help locate the applicable edition; include reference R911274263.
Rexroth DIAX04 HDD and HDS Drive Controllers, 2nd Generation — Commissioning Manual
Factory documentation for HDS ratings, modules, connection points, installation and second-generation hardware.
RAC Main-Spindle Controller Documentation
Reference for RAC controller interfaces, programming and system planning.
A direct manufacturer download has not been verified. Ask Litco to help locate the applicable edition; include reference RAC project-planning manual search.
MAC Servo Drives with TDM and KDS Modules
Reference for MAC motors with TDM and KDS legacy servo-drive modules.
A direct manufacturer download has not been verified. Ask Litco to help locate the applicable edition; include reference 9.552.268.4.
TVD1.3 Power Supply Module - Applications Manual
Reference for TVD construction, mains and DC-bus ratings, auxiliary components, type codes and fault clearing.
A direct manufacturer download has not been verified. Ask Litco to help locate the applicable edition; include reference 271434.
TVR3.1 Power Supply Module - Applications Manual
Reference for regenerative TVR system layout, mains connection, DC bus, installation and troubleshooting.
A direct manufacturer download has not been verified. Ask Litco to help locate the applicable edition; include reference 266303.
DIAX04 HVE and HVR Power Supply Units
Reference for HVE and HVR supply architecture, dimensions, mains connection and DC-bus control.
A direct manufacturer download has not been verified. Ask Litco to help locate the applicable edition; include reference R911275432.
Rexroth IndraDrive Supply Units and Power Sections
Factory documentation for HMV supply units, HMS power sections and HCS converters.
IndraDrive Control Sections CSB01, CSH01 and CDB01
Factory documentation for control-section type codes, communication, encoder and I/O modules, safety, panels and connections.
BTV20.3 - Project Planning Manual
Factory documentation for BTV20 hardware, keyboard and front panel, interfaces, configurations and replacement planning.
Original Litco content with Litco branding, contact information and an independent-supplier disclosure.
Factory PDFs retain their original publisher and branding. A document reference is not a guarantee of a matching edition for your unit.
Manuals are edition-specific reference material. The physical nameplate, firmware, installed modules, machine documentation and applicable safety instructions govern the actual replacement or service decision.
Still identifying the hardware?
Start with the nameplate, not a guessed manual.
Send the complete code or one readable tag photo. Litco can identify the family before you rely on edition-specific planning information.