Independent Indramat specialistsSan Antonio · Ramos Arizpe
Visit LitcoAutomation.com ↗Mon–Fri · 8am–6pm CT
INDRAMAT.COMBy Litco Automation
210-680-9570Request a Quote
Menu

Equipment category

Indramat Power Supplies & Line Modules

Power supplies, regenerative units, mains modules and line-conditioning families for legacy and later-generation drive systems.

Start with the label

Search the complete or partial type code.

Use the family prefix, model, or every character from the nameplate. Litco verifies current stock and the exact configuration before quoting.

HOW THE DIRECTORY WORKS
01

Choose a family

02

Open the model group

Directory entries are checked against Litco records and manufacturer documentation. If a code is not listed yet, send the complete nameplate for identification and a current-stock check.

System context

Trace power from the line connection to every axis.

Upload a nameplate →
01

Mains connection

Line voltage, phase, filters, chokes and protection

02

Energy handling

Supply class, DC bus, regeneration and braking

03

Connected load

Every drive, motor and auxiliary module on the bus

Documented family directory

Choose the platform, then the family.

Every curated family in this category has a permanent route below. Inventory-backed entries are labeled; reference families without a matched record remain available for exact-code inquiries. Open a family page for its direct model links, identification notes, inventory records, repair and exchange guidance.

01 / Legacy systems

Modular power supplies and capacitance modules

Legacy supply, regenerative and DC-bus families used with modular servo and spindle-drive systems.

FAMILY DIRECTORY

02 / DIAX & IndraDrive

Supply and distributed-power units

Supply families where regenerative behavior, line connection and DC-bus architecture must match.

FAMILY DIRECTORY

03 / Line components

Mains, filter and choke modules

Connection, filter and choke hardware selected around the supply unit and complete cabinet load.

FAMILY DIRECTORY

04 / Energy management

Braking and DC-bus accessories

Capacity, braking, resistor and safety-zone hardware matched to the converter and duty cycle.

FAMILY DIRECTORY

05 / Load-side hardware

Motor filters, chokes, cooling and housings

Output-side and mechanical support hardware matched to the assigned drive and installation.

FAMILY DIRECTORY

06 / Transformers

Drive-system transformers

Autotransformers and isolation transformers selected from the full line, load and rating-plate data.

FAMILY DIRECTORY

07 / ctrlX DRIVE

ctrlX supply and line modules

Documented feeding, regenerative, DC conversion, line-interface, choke, filter and capacity families.

FAMILY DIRECTORY
What “inventory records found” means

The supplied Litco inventory data contains this family. It does not mean a specific unit is on the ready-to-go rack today. Send the complete suffix so Litco can verify the exact unit, condition and current availability.

Check current stock

What to match

Check the fields that change compatibility.

01 / Input

Confirm the line connection

Match mains voltage, phase, line components and the required DC-bus power for the connected drive system.

02 / Energy

Check regeneration and braking

Regenerative and bleeder-based supplies use different energy-handling hardware, chokes and resistor arrangements.

03 / System

Map the connected drives

Identify every drive on the DC bus plus auxiliary modules, contactors and filters before selecting a replacement supply.

ONE INTAKE / FOUR ROUTESIdentify · Inventory · Repair · Exchange

Start with the type code, nameplate photos and machine context. Litco will route the request to the right next step.

Search inventoryRepair & exchange

Availability · repair · exchange

Send the complete code.

The suffix can change electrical and mechanical compatibility. Include every character and a clear nameplate photo.

Verify current availabilityCall 210-680-9570