Bottom line
What this comparison can establish
Treat TVD and TVR as different supply architectures. Identify the complete supply code and the entire mains-to-DC-bus path before planning replacement.
Power-system comparison / mains and DC bus
TVD vs TVR Indramat Power Supplies
TVD and TVR are legacy Indramat power-supply families documented separately. Their role cannot be reduced to cabinet width or a similar DC-bus connection; mains equipment, power class, energy handling and connected drives must be reviewed.
Side-by-side identity
What each product label must tell you
- Role
- Legacy power-supply family with edition-specific mains, DC-bus and auxiliary-component planning.
- Verify
- Full TVD code, line connection, continuous power, bus voltage, choke and braking components.
- Do not assume
- A TVD label match does not by itself confirm the connected line equipment or available braking capacity.
- Role
- Regenerative legacy supply family documented with its own system layout and mains requirements.
- Verify
- Full TVR code, mains components, regeneration path, DC bus, connected drives and installation edition.
- Do not assume
- Do not treat regenerative and bleeder-based energy handling as interchangeable.
Decision path
Turn the cabinet into a useful evidence set
What supply is physically installed?
Capture: Photograph the complete TVD or TVR label and cabinet position.
Then: Open the correct official applications manual edition.
How is energy handled?
Capture: Record braking resistor, bleeder, regeneration and line-return components.
Then: Keep the existing energy-handling architecture in the review.
What is connected to the bus?
Capture: List every drive module, motor load and auxiliary module on the DC bus.
Then: Check the supply as a system rather than a stand-alone box.
Official manufacturer records
Use the edition that matches the installed hardware.
Verified downloads open on the manufacturer’s site. Other references open a library entry with assistance options. Confirm the applicable edition, physical nameplate and machine documentation.
271434TVD1.3 Power Supply Module - Applications Manual
Reference for TVD construction, mains and DC-bus ratings, auxiliary components, type codes and fault clearing.
View document reference →266303TVR3.1 Power Supply Module - Applications ManualReference for regenerative TVR system layout, mains connection, DC bus, installation and troubleshooting.
View document reference →Common questions
Before you request a configured match
Can a TVD be replaced by a TVR?
That cannot be approved from family names. The mains, DC-bus, energy-handling, drive load and machine documentation must be reviewed.
Why photograph the whole cabinet?
Line components, braking or regeneration hardware and connected drives can determine what supply configuration is required.
Should a tripped supply be reset immediately?
Preserve the displayed and cabinet evidence first, then follow only qualified procedures and the applicable machine and manufacturer documentation.
Availability · repair · exchange
Send the complete code.
The suffix can change electrical and mechanical compatibility. Include every character and a clear nameplate photo.