This is not a photo of the exact inventory unit. Request current unit and nameplate photos with your quote.
The MDD071A-N-030-N2S-095GB1 is a recorded designation in the Indramat MDD family. Match every character and the installed configuration before ordering or substituting.
Motors that share a frame can differ in winding, feedback, shaft, flange, holding brake, cooling and connector arrangement. Verify the full suffix and connected drive.
Send the full MDD071A-N-030-N2S-095GB1 nameplate, any R911 material number, your required condition and delivery deadline. Litco reviews potential supply against the installed configuration before confirming a quote. A catalog entry does not establish current stock or interchangeability.
How the sourcing review works →
The complete designation and material number were matched to the manufacturer listing on 2026-11-12. This identifies the catalog configuration; it does not verify a physical unit or its availability.
MDD071 digital AC servo motors have A, B and C length packages. The planning tables document all three lengths with 030, 040 and 060 nominal-speed codes; the rest of the nameplate identifies the mechanical and feedback configuration.
| Length packages | A, B and C |
|---|---|
| Nominal-speed codes | 030: 3,000 rpm; 040: 4,000 rpm; 060: 6,000 rpm |
| Centering diameter | 095: 95 mm |
| Feedback | S: digital servo feedback; T: integrated multiturn absolute encoder |
| Output shaft | G: plain; P: keyed |
| Power connection | A or B: corresponding motor side; R or L: right or left when facing the shaft with the connection housing above |
| Blocking brake | 0: none; 1: 3.0 Nm; 2: 6.5 Nm |
| Housing | N: standard housing for natural convection or surface cooling |
Compatibility checkpoint: Nominal speed is not guaranteed usable speed. Verify the complete suffix, motor/drive combination, load and cooling against the applicable performance tables. A family-level option list is not an interchangeability or stock claim.
These are identification notes for the documented model or generation. Option lists describe the manual scope; they do not decode every field of this exact unit or confirm an interchangeable replacement.
View manual reference: MDD Digital AC Servo Motors - Project Planning Manual, printed pages 64-65 and 72 →| Identity | Complete type code, material number and revision from the physical label |
|---|---|
| Electrical design | Winding or nominal-speed field |
| Feedback | Encoder, resolver, tacho or digital-servo-feedback field |
| Mechanical interface | Shaft, flange and centering code |
| Holding | Brake selection and torque |
| Installation | Cooling and connector direction |
Start with a straight-on nameplate and the complete motor. Add the shaft and flange, power and feedback connectors, rear feedback housing, and any brake or cooling labels. Photograph only when access is safe under your facility procedures.
Full nameplate and photo checklist →Send the machine builder, model, axis, fault history and photos of the label and installed interfaces. Litco reviews the unit before confirming repairability, testing, timing and terms.
These records may share a model or family, but only a complete configuration review can establish compatibility.
Availability · repair · offers
The suffix can change electrical and mechanical compatibility. Include every character and a clear nameplate photo.
